If you are planning on remodeling your home and don’t want to DIY the electrical installation, be careful. There are a lot of things that could go wrong. If you are not that familiar with local electrical codes, the safer option is to hire a residential electrician. However, if you still wish to proceed with your very own home remodeling project as well as electrical installation, there are a few things that you should keep in mind.
Here are the common issues faced when doing electrical installation:
When installing electrical wiring, everything must be held in place securely. If the staples holding your wires are not driven deep enough or in the correct angle and area, your wires could come off. If the staples are driven too deep, the wires could be damaged and expose the copper strands and cause a short and possibly an electrical fire. A trained residential electrician Florence SC will have no problem installing electrical wiring. If you are not confident enough, it is best to simply leave such tasks to the pros.
Using the wrong wire gauge
There are different gauges or sizes of electrical wiring. The diameter of the insulation and copper inside the wire is important. Depending on the application, a certain size of wire must be used. This is to ensure that the wiring can bear the electrical load without heating up or catching fire. Thicker wire means it can handle bigger electrical loads while thinner ones are only for light-duty applications.
Using incorrect wire length
Electrical connections are made by spanning electrical wiring from the main panel to an outlet or directly to an electrical appliance. This must be done accordingly. The appropriate length of wire must be used.
Leaving wiring unprotected
Aside from using the correct gauge and length of wire, everything must be protected against exposure especially for outdoor applications such as deck lighting. Electrical work must be covered to a degree that it is not easily tampered with and the wirings not easily compromised.
Improper electrical connection
There’s a specific way on how to connect one wire to another. Splicing wires together is one thing that a lot of people take for granted. Simply twisting the two exposed wire ends together often gets easily separated with minimal force. The right method of splicing wires must be applied. If you are not familiar, hire Florence Electrician Pros to do all electrical installations accordingly.
Whenever you are having a home renovation, a kitchen remodels, or a room addition, be sure to hire an electrician. While there are some smaller electrical tasks that you can accomplish on your own, some may prove too complicated for the average DIYer. To err on the safe side of caution and to keep mistakes to a minimum, hire an electrical professional. Also, hire one that is licensed and reputable to ensure that you are getting the right kind of service.
Are you planning on remodeling your home? Hire Florence Electrician Pros for all electrical installations! You may reach us at (843) 418-4792.
Florence Electrician Pros
Florence, SC 29501