Everything in your house that gets power from the wall outlet connects to an electrical panel where connections can be turned on or off. A lot of homeowners don’t really pay much attention to what’s going on with circuit breaker boxes. However, it should be noted that breaker boxes are very important. They serve as a failsafe mechanism whenever there’s a problem with a particular circuit like overloading or short circuits. It is crucial that breaker boxes be maintained and kept in proper working condition at all times. Any damage to the breaker box and the circuit breakers inside can have a severe negative impact on the entire house and the people who dwell in the residence.
Common issues with an electrical panel
- Panel overcrowding – a lot of the homes that were built or remodeled over the last ten years commonly have a 200-amp electrical panel installed. For a regular household, a 200-amp electrical panel would suffice. It could handle the day-to-day energy usage of the entire family. This includes lighting, entertainment devices, refrigerators, washing machines, and more. In a nutshell, a 200-amp service panel is a norm these days. However, older homes that were built in the early 1990s were equipped with a 100-amp electrical panel. This means the service panels installed back then won’t be powerful enough to suffice the usage of today’s families. You might want to have an emergency electrician take a look at your service panel if you’re living in an older home.
- Insufficient capacity – circuit breakers are only rated to handle a certain amount of load. Once the load reached a breaker’s set threshold, it would trip. This causes the electricity leading to a certain outlet to be cut off. This is the normal process of how a circuit breaker works. However, older homes may have circuit breakers that are of lower capacities. This means you won’t be able to use equipment or appliances that go beyond the rated capacity of the breaker. If you do attempt to use an electrical appliance that is rated higher than the capacity of the breaker, it will only trip the breaker and you won’t be able to use the appliance. It’s also dangerous to overload a particular outlet since the wires attached to the outlet can handle only a certain amount of electricity. If too much electricity is drawn from one outlet, it could cause the wires to heat up and malfunction.
- Corrosion – due to years in operation, the circuit breaker could fall victim to corrosion. It is always a good idea to have your circuit breaker boxes checked every so often to avoid any electrical mishaps. Corrosion could lead to a lot of things including circuit breaker failure. The breaker could frequently trip or worse, it won’t trip over an overload which may lead to house fires. In case you spot any corrosion in your service panel, call your local Florence emergency electrician right away and have it serviced.
When faced with electrical issues at home, call your electrical contractor like Florence Electrician Pros right away. Try to stay away from DIY electrical repairs as it is not recommended and may cause harm.
Call Florence Electrician Pros if you have any electrical-related problems.
Florence Electrician Pros